Robert Bunsen Quiz Questions
1. Robert Bunsen is most famous for his contributions to the field of:
(a) Chemistry
(b) Physics
(c) Biology
(d) Geology
2. The Bunsen burner is a common laboratory equipment used for:
(a) Heating substances
(b) Measuring temperature
(c) Filtering liquids
(d) Conducting electrical experiments
3. The Bunsen burner consists of:
(a) A base, a tube, and a flame
(b) A base, a chimney, and a flame
(c) A base, a tube, and a valve
(d) A base, a chimney, and a valve
4. The air inlet valve on a Bunsen burner controls:
(a) The temperature of the flame
(b) The amount of gas flowing
(c) The height of the flame
(d) The color of the flame
5. A Bunsen burner produces the hottest flame when:
(a) The air inlet valve is closed
(b) The air inlet valve is partially open
(c) The air inlet valve is fully open
(d) The gas valve is closed
6. The hottest part of a Bunsen burner flame is the:
(a) Inner cone
(b) Outer cone
(c) Tip of the flame
(d) Base of the flame
7. Robert Bunsen also made significant contributions to the field of:
(a) Spectroscopy
(b) Botany
(c) Zoology
(d) Astronomy
8. The Bunsen burner was invented in:
(a) The 17th century
(b) The 18th century
(c) The 19th century
(d) The 20th century
9. What is the purpose of the chimney on a Bunsen burner?
(a) To increase the temperature of the flame
(b) To prevent the flame from going out
(c) To provide a stable base for the burner
(d) To control the amount of air entering the burner
10. What is the difference between a luminous flame and a non-luminous flame produced by a Bunsen burner?
(a) A luminous flame is hot, while a non-luminous flame is not.
(b) A luminous flame is blue , while a non-luminous flame is yellow and smoky.
(c) There is no difference between the two.
(d) A luminous flame is produced when the air inlet valve is closed, while a non-luminous flame is produced when the air inlet valve is open.
11. What is the name of the part of a Bunsen burner where the gas enters?
(a) The chimney
(b) The base
(c) The tube
(d) The collar
12. What university did Robert Bunsen attend for most of his academic career?
(a) University of Oxford
(b) University of Heidelberg
(c) University of Cambridge
(c) University of Paris
13. Which of the following is a safety hazard when using a Bunsen burner?
(a) Leaving a lit Bunsen burner unattended
(b) Wearing loose clothing near the burner
(c) Using a Bunsen burner in a crowded area
(d) All of the above
14. What is the best way to extinguish a Bunsen burner flame?
(a) Blow it out
(b) Turn off the gas at the source
(c) Pour water on it
(d) Cover it with a fire extinguisher
15. What is the optimal angle for holding a test tube over a Bunsen burner flame?
(a) 45 degrees
(b) 60 degrees
(c) 90 degrees
(d) It depends on the experiment
16. What is the best way to prevent a Bunsen burner from producing a smoky flame?
(a) Increase the flow of gas
(b) Decrease the flow of gas
(c) Increase the amount of air entering the burner
(d) Decrease the amount of air entering the burner
17. In the Bunsen burner, what controls the amount of air that mixes with the gas?
(a) Needle valve
(b) Barrel
(c) Base
(d) Chimney
18. The Bunsen burner was invented in collaboration with:
(a) Michael Faraday
(b) Henry Cavendish
(c) Peter Desdega
(d) Thomas Edison
19. The Bunsen burner is named after Robert Bunsen because:
(a) He invented it
(b) He was the first to use it
(c) He made significant improvements to it
(d) He was the first to study its properties
20. What is the purpose of the air hole in a Bunsen burner?
(a) To regulate the temperature
(b) To prevent the flame from going out
(c) To provide oxygen for combustion
(d) To increase the pressure of the gas
21. Which type of flame is produced when the air hole in a Bunsen burner is closed?
(a) Yellow flame
(b) Blue flame
(c) Orange flame
(d) Green flame
22. Which type of flame is produced when the air hole in a Bunsen burner is open?
(a) Yellow flame
(b) Blue flame
(c) Orange flame
(d) Green flame
23. Which part of the Bunsen burner controls the height of the flame?
(a) Needle valve
(b) Barrel
(c) Base
(d) Chimney
24. What is the correct procedure for lighting a Bunsen burner?
(a) Turn on the gas, strike a match, and then light the flame
(b) Strike a match, turn on the gas, and then light the flame
(c) Turn on the gas and then strike a match
(d) Strike a match and then turn on the gas
25. The Bunsen burner is used primarily in:
(a) kitchens
(b) living rooms
(c) laboratories
(d) factories
Robert Bunsen Quiz Questions with Answers
1. Robert Bunsen is most famous for his contributions to the field of:
(a) Chemistry
2. The Bunsen burner is a common laboratory equipment used for:
(a) Heating substances
3. The Bunsen burner consists of:
(c) A base, a tube, and a valve
4. The air inlet valve on a Bunsen burner controls:
(b) The amount of gas flowing
5. A Bunsen burner produces the hottest flame when:
(c) The air inlet valve is fully open
6. The hottest part of a Bunsen burner flame is the:
(c) Tip of the flame
7. Robert Bunsen also made significant contributions to the field of:
(a) Spectroscopy
8. The Bunsen burner was invented in:
(c) The 19th century
9. What is the purpose of the chimney on a Bunsen burner?
(c) To provide a stable base for the burner
10. What is the difference between a luminous flame and a non-luminous flame produced by a Bunsen burner?
(a) A luminous flame is hot, while a non-luminous flame is not.
11. What is the name of the part of a Bunsen burner where the gas enters?
(d) The collar
12. What university did Robert Bunsen attend for most of his academic career?
(b) University of Heidelberg
13. Which of the following is a safety hazard when using a Bunsen burner?
(d) All of the above
14. What is the best way to extinguish a Bunsen burner flame?
(b) Turn off the gas at the source
15. What is the optimal angle for holding a test tube over a Bunsen burner flame?
(a) 45 degrees
16. What is the best way to prevent a Bunsen burner from producing a smoky flame?
(c) Increase the amount of air entering the burner
17. In the Bunsen burner, what controls the amount of air that mixes with the gas?
(c) Base
18. The Bunsen burner was invented in collaboration with:
(c) Peter Desdega
19. The Bunsen burner is named after Robert Bunsen because:
(a) He invented it
20. What is the purpose of the air hole in a Bunsen burner?
(c) To provide oxygen for combustion
21. Which type of flame is produced when the air hole in a Bunsen burner is closed?
(a) Yellow flame
22. Which type of flame is produced when the air hole in a Bunsen burner is open?
(b) Blue flame
23. Which part of the Bunsen burner controls the height of the flame?
(a) Needle valve
24. What is the correct procedure for lighting a Bunsen burner?
(a) Turn on the gas, strike a match, and then light the flame
25. The Bunsen burner is used primarily in:
(c) laboratories